Helix Complete Mustang II IFS and Triangulated 4-Link 1-3 Inch Lowering Combo Kit for 67-79 Ford Truck Drilled Slotted Wave Rotors Calipers Heavy-Duty Crossmember Control Arms Nitrogen Gas Shocks Drop
Mustang II 2 IFS Front Rear Suspension 1-3 in. Lowering kit for 67-79 Ford Truck
Helix Suspension Brakes and Steering | HEXIFSTTK13KFT6779 | SKU: 601831
Get ready to tear up the asphalt and leave the "stock" crowd in the rearview. If you’re tired of that old 67-79 Ford truck handling like a hay wagon, it’s time to step up to a Helix Mustang II IFS Kit. We’ve engineered this setup with factory-perfect dimensions so it drops right in, giving you that razor-sharp independent suspension and the "whoa" power your high-horsepower build demands.
This isn’t just a pile of parts; it’s a total transformation. We’re talking a heavy-duty Crossmember and MII Control Arms paired with 2” Drop Spindles and 300lb springs to give your ride that aggressive, "in the weeds" stance.
Stop on a dime with our high-performance Wave Rotors, Top Hats, and a pair of loaded Calipers held tight by rock-solid Caliper Brackets. We’ve even handled the fine detailsfrom the Wheel Bearing Dust Caps and Standard Gas Shocks down to the complete Hardware Pack and Nut and Washer Kit.
Steering is smooth and tight thanks to the Mustang II Style Manual Rack and Tie Rod Ends, while the included 4-Link Kit and Coil Brackets ensure your rear end is hooked up and ready to haul.
INCLUDES
- Calipers & Caliper Brackets
- Wave Rotors (slotted and Drilled)
- Coil Bracket
- Top Hats
- MII Control Arms
- Lower Control Arms
- Heavy-Duty Crossmember
- Wheel Bearing Dust Cap
- MII Hardware Pack
- MII Gas Shocks
- 300lb spings
- Greece Cap Seal
- 2inch Drop Spindles
- Bearings/Races
- Mustang II Style Manual Steering Rack
- Tie Rod Ends
- Heavy Duty Adjustable 4-Link Kit
Don’t just drive itdominate it. Give your custom project the backbone it deserves and stay ahead of the pack with Helix. For more information please consult a Helix sales representative or visit our website.
Features
:: Mustang II IFS Kit :: Specifications
Application :: Stage 2 56.5 Mustang II Kit with Standard Spindles & Sway Bar
Feature :: All Steel Construction
Tube Finish :: Plain Painted Surface
Cross Shaft Finish :: Powder Coated
Screw In Ball Joint :: Yes
TIG Welded :: Yes
Grease Fitting Included :: Yes
Urethane Dust Boot :: Yes
Fully Assembled :: Yes
Adjustable :: No
Feature :: (Ball Joint Shaft Center to Cross Shaft Eye Center)
Knurled Mounting Surface :: Yes
Control Arm Pair :: Yes
T-Bolts Included :: No
Castle Nut :: 1 Per Arm
Cotter Pin :: 1 Per Arm
Bushing/Sleeves :: 2 Per Arm
Plain Washer :: 2 Per Arm
Nyloc Nut :: 2 Per Arm
Castle Nut Spacer :: 1 Per Arm
Control Arms :: Full .120 Wall Tubing
Upper Control Arm Tube O.D. :: 7/8" (22mm)
Upper Control Arm Center to Center Length :: 8” (20.32 cm)
Upper Control Arm Overall Width :: 10.5” (26.67 cm)
Upper Control Arm Overall Length :: 9.5” (24.13 cm)
Upper Control Arm Cross Shaft O.D. :: .78” (19.8 mm)
Lower Control Arm Cross Shaft O.D. :: 5/8” (16 mm)
Lower Control Arm Tube O.D. :: 1" (25 mm)
Lower Control Arm Center to Center Length :: 13” (33.0 cm)
Lower Control Arm Overall Width :: 10.5” (26.7 cm)
Lower Control Arm Overall Length :: 14.75” (37.46 cm)
:: Four Link Kit :: Specifications
Application :: Heavy Duty Triangulated Full Size Universal 4-Link
*Product images are for reference only & may differ from actual product. Rewards
are subject to change & are not eligible when coupons are applied. See Rules & Restrictions
for
more information.
Free, free, free! Need we say more? The Johnny Law reward program lets you earn points that you can redeem
for free, for street rod parts or gear. It's simple; build your ride and save each time! Different levels of
membership are available to let you earn greater auto part discounts on your goods. Ask a Johnny Law Rep for
more details.
